产品名称：欧莱斯PE丝印移印系列油墨 PE丝印油墨油墨特性：亮光，色彩丰满，附着力优，细度均匀应用行业：手袋，包装材料行业等应用范围：PE薄膜，PP薄膜，EVA膜物理特性：过网性能：40-140T表干时间：自然挥发10-15分钟实干时间：自然挥发4-12小时稀释剂：快干、中干、慢干清洗剂：网版清洗剂消泡剂：PE专用消泡剂涂覆面积：20-35平方米/公斤配色：只可用PP系列油墨相互调配，不得混用其它类型油墨。使用方法：（1）使用前应充公搅拌均匀，用后随时封闭。 （2）根据需要可添加10-20%的稀释剂。 （3）多色套印时，需待油墨表干后再进行下颜色的印刷。 （4）制品印刷后，需待墨膜完全干透，才可层叠，且不易重压，不适宜在高温下保存，以免回粘或粘结。（5）网版堵网可用稀释剂清洗，待网版干燥后再开始印刷。 （6）多色套印时，需待墨膜干透后再进行下一颜色的印刷。 （7）不得与其它类型油墨混合使用，否则将降低油墨质量。注意事项：（1）不同材料对油墨的适应性不同，客户需要试印符合要求后再批量生产。 （2）调金、银色油墨，现调现用，不能贮存。 （3）根据气候变化应选用不同干革命燥的稀释剂。 （4）制品印刷后需待墨层完全干透后，才可层叠且不能重压。 （5）本品储存及使用时请远离火源，避光环境保存。 （6）印刷好图案，不得同软质PVC接触存放，以免PVC中增塑剂侵蚀油墨层而造成发粘及掉色。危险物：危险物第四类第二石油类。安全保管：（1）为了保护皮肤及眼睛，请戴上保护手套和护镜。若皮肤不慎沾上油墨，用肥皂彻底清洗，若不慎入眼，请立即用大量清水清洗后看医生。 （2）使用后，将容器保管在全封闭、冷暗处。 （3）处理本制品前，请使用者在参照MSDS的基础上对油墨作负责的处理。 Product Name: Ou les PE silk screen printing ink seriesPE silk screen printing ink ink characteristics: light, color rich, excellent adhesion, uniformity of fineness application industries: handbags, packaging industry and other applications: PE film, PP film, EVA film physical properties: the net performance: the 40-140T surface dry time: the volatile nature of10-15 minutes work time: the volatile nature of4-12 hours: quick-drying, diluent stem, slow dry cleaning agent: screen cleaning agent defoamer: PE special defoamer coating area:20-35square meters / kg color: only available PP series inks, mutual deployment, shall not be mixed with other types of ink. Method of use: (1) before use should be confiscated stirring evenly, use at any time after the closure of. (2) can be added according to the10-20% diluent. (3) multicolor overprint, until the ink dry and then to the next color printing. (4) products after printing ink film, to be completely dry, can be stacked, and less weight, not suitable for preservation at a high temperature, so as to avoid the back glue or adhesive. (5) screen plugging use thinner cleaning, drying and start the printing to the screen. (6) multicolor overprint, need to be a film of ink is dry before the next color printing. (7) may not be associated with other types of ink mixed use, otherwise will reduce the quality of the printing ink. Note: (1) different materials on ink different adaptability, customers need to try to meet the requirements after the mass production. (2) transfer gold, silver ink, is adjustable is used, can not be stored. (3) according to the climate change should choose different revolution dry thinners. (4) products after printing ink layer needs to be completely dry, can be stacked and not pressure. (5) the goods storage and please use away from the fire source, light environment preservation. (6) the printed pattern, may not be the same as soft PVC contacts are deposited, lest the plasticizers in PVC erosion ink layer caused by sticky and fade. Danger: hazardous materials fourth second oil. Safe custody: (1) in order to protect the skin and eyes, wear protective gloves and goggles. If the skin inadvertently stained with ink, using soap to clean thoroughly, if contact with eyes, please rinse immediately with plenty of water after the doctor. (2) after use, will be kept in a closed container, cold dark. (3) processing the products before, please refer user in MSDS on the basis of the ink is responsible for processing.
手机版丝印网
手机版APP（安卓）
显示原图
免责声明：以上信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责。丝印特印网对此不承担任何责任。